VT6 PTFE needle valve 6mm orifice
PTFE needle valves are designed for laboratory and industrial applications for regulating corrosive gases and liquids or for high purity service. They may also be used as shut off valves.
Fluids contact only PTFE and PCTFE materials. Bushings are made of 316 stainless steel.
Valve spindles are made of rigid PCTFE to minimize the undesirable material “creeping” normally associated with PTFE.
PTFE valves are designed for relatively high flow ranges while still performing well in low flow rates.
Valves may be used in pressure or non-critical vacuum service.
The simplicity of design - there are only six components (including a single PTFE o-ring) - assures reliability and minimizes sources of leakage. It takes seconds to disassemble the valve for cleaning and maintenance.
The PTFE o-ring is radially compressed and due to this unique design feature the degree of compression may be adjusted without disassembly by tightening the bushing.
| SPECIFICATIONS |
| MAXIMUM OPERATING PRESSURE 75 psig (517 kPa) |
| MAXIMUM OPERATING TEMPERATURE 150°F (65°C) |
| ORIFICE SIZE 6.0 mm (0.250") diameter |
| MATERIALS OF CONSTRUCTION |
| FLUID CONTACTING MATERIALS Body and o-ring-PTFE. Valve spindle-PCTFE |
| NON-FLUID CONTACTING MATERIALS Bushings 316 stainless steel.Mounting Nut and Adjusting Knob Delrin. |
Valve Catalog Valve Catalog - precision barstock valves, PTFE precision needle valves, PSV proportional solenoid valves, stepping motor valves
VT / VT6 valves literature model VT / VT6 - PTFE utility and metering valve catalog page(s)
VB valves literature model VB - Brass or 316 Stainless Steel barstock utility and metering valve catalog page(s)
Rotameter Catalog Full line Rotameter and Valves Catalog
Digital and Analog Flow Meters Catalog Full line Digital and Analog Flow Meters, Controllers, Valves and Accessories Catalog
