TPV Peristaltic Pump Heads
Peristaltic pump designed to move liquids of low to high viscosity from source to destination at user-set speeds according to the motor installed.
Principle of Operation
Flexible tubing, which conveys fluid from source to destination, is squeezed inside the pump head by rotating rollers against a rigid, crescent-shaped occlusion wall. The rollers induce suction in a gently pulsing rhythm. The unique tubing holding subassembly is adjustable to increase pressure, or to decrease pressure for extended tubing life.
Each pump head is mounted on a front panel, with the adjustable tubing holder and a safety cover.
SPECIFICATIONS |
| TUBING INSIDE DIAMETERS: 1/4, 5/16 or 3/8 in. for TPV1, 7/16 or 1/2 in. for TPV2 |
| TUBING WALL THICKNESS: 1/16 in. |
| RECOMMENDED TUBING MATERIALS: Tygon® E-3603, peroxide-treated silicone, platinum-treated silicone, PharMed®, Versilic® silicone, Tygon® Sanitary silicone, Norprene®, Tygon® Long Flex Life, and Hypalon® |
| MAXIMUM LIFT, PUMP HEAD: 310 in. H2O (11.2 psig) |
| MAXIMUM SUCTION, PUMP HEAD: 310 in. H2O (11.2 psig) |
| DIMENSIONS: 7.70 in. (195.6 mm) wide x 6.56 in. (166.2 mm) high x 2.31 in. (58.9 mm) deep |
| MATERIALS OF CONSTRUCTION: anodized aluminum, 316 stainless steel rollers and shafts |
PUMP FLOW RATES
TPV1 Pump Head Flow Rates
TPV2 Pump Head Flow Rates
Pump Catalog Full line Pumps Catalog
Peristaltic Pumps and Pump Heads Operating Manual Peristaltic Pumps and Pump Heads Operating Manual - Rev. F, Feb-2019
Rotameter Catalog Full line Rotameter and Valves Catalog
Digital and Analog Flow Meters Catalog Full line Digital and Analog Flow Meters, Controllers, Valves and Accessories Catalog
